Commander #65 "Lucky Dawg"

[Lucky Dawg]

New panel. Added an auto / man bilge switch - my original (from PO) just plugged via duplex and a lighter plug into the 12v; a battery meter through a 3way SPDT switch that will accomodate a second battery at some point - stays in the center-off (non draining) position unless needed to check battery level; and a simple West panel. What you can't see is the 3/8" pilot light that illuminates on the reverse side of the bulkhead when the bilge activates. A Don Casey idea that made sense to me. Wire over the top of the box is my hardwired GPS cable that reaches the GPS bracket on the bulkhead. I am quite pleased with my first shippy electrical project.

picture 1 - the mess that was inside the box - complete with wire nuts... and some interestingly connected circuits....
picture 2 - lots of extra notes and ID tags so I could remember what was what - and of course my handy dandy owners manual at my side
picture 3 - finished product.