-
Chain locker cover
Finished this cover today. I used the same design as A414 - cleat and stainless cabinet hardware holding on the center piece. I fiddled with a couple different looks for the anchor, but couldn't make one I liked more than Mike's.
I've been watching some videos (e.g. https://www.youtube.com/watch?v=zN-9vCSJWDQ) on wet sanding the final coat with 1500 / 2000 grit, but I think I'm probably going to just leave it as it is. 9 coats of Epifanes and it is about 99% perfect.
Made from a piece of 1/2" african mahogany plywood. Natural, it was way too light and didn't match my interior woodwork at all. I combined a couple colors of stain and after some experimenting, got a good match. (It looks a good bit lighter in this picture than it is.)
My windows are coming along. I'll post some pix soon.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Forum Rules