I have recently purchased hull number 350. The boat is basically very sound, but someone has messed around with the interior. I want to bring the interior back to as close to original as possible. The boat has had the atomic four removed and an outboard motor well was installed. I have recently removed a head and the holding tank in the V-berth area and plan on putting in a porta potty. A lot of the forward area was chopped up to accomodate the head and holding tank. I am very experienced in marine carpentry so I am capable of doing a really nice job. I just need some pictures and a few words of advice and encouragement. Anyone have some photos they could share? When I purchased the boat I was given some factory blue prints showing the atomic four engine installation measurements, and a full size template\blueprint of the rudder assembly. I would be happy to share these with anyone who could use them. I have a number of other sailboats and power boats and this little lady is rapidly becoming my favorite. Thanks in advance for any help you kind folks might provide. Oh by the way, I live in the San Juan Islands, so the boat can be sailed year around. If anyone from the association comes up this way, my boat would be available to be sailed by association members. This is fantastic sailing country