+ Reply to Thread
Page 3 of 17 FirstFirst 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 LastLast
Results 31 to 45 of 249

Thread: A-50 Revival

  1. #31
    Join Date
    Sep 2001
    Location
    Orinda, California
    Posts
    2,311
    And, what it looked like as he removed all the stuff. Note the pile in the cockpit. Must be something there he can sell on eBay!
    Attached Images  

  2. #32
    Join Date
    Sep 2001
    Location
    Orinda, California
    Posts
    2,311

    Question Complex Head

    As I get to post these photos, we shall begin by examining some intersting technology . . . an engineer's delight . . . The head
    Attached Images  

  3. #33
    Join Date
    Sep 2001
    Location
    Orinda, California
    Posts
    2,311

    Head Plumbing

    And, check out these pipes ! Frank says that there are four 1-1/2" and one 1-2/3" hoses going up to the deck -- and four (4) Y valves! Maybe Frank will tell us all how this works . . .
    Attached Images  
    Last edited by Bill; 04-20-2005 at 09:08 AM.

  4. #34
    Join Date
    May 2004
    Location
    Pembroke Ontario Canada
    Posts
    592

    Talking Holy Hose !!!

    Bill .. if I could tell you how all that worked I would have needed to graduate from Harvard. The guy who installed it must have just bought shares in the hose manufacturing company.....or possibly the company making the plastic 'ties'. There was honestly OVER 60ft of hose total and had to be 100 ties !!! While I have NO doubt this system could ' slice,dice and do julian french fries ' I just couldn't figure it out. All joking aside , you could pump head to tank , head over board and tank overboard......I just couldn't find the instructions. The big attraction to the Ariel was the pleasing lines and simplicity of sailing a small boat.....so ...45ft of 1 1/2 hose , 98 ties and 3 Y valves later I have a simple system again. Guess I should have got that engineering degree !! Frank #50

  5. #35
    Join Date
    Sep 2001
    Location
    Orinda, California
    Posts
    2,311

    Varnishing Rack

    Frank has been busy remodeling REVIVAL. Here is his "varnishing rack" for the trim. That piece with the holes will show up later on the maincabin side of the strongback.
    Attached Images  

  6. #36
    Join Date
    Sep 2001
    Location
    Orinda, California
    Posts
    2,311
    Here is the new "self draining" anchor locker in progress . . .
    Attached Images  

  7. #37
    Join Date
    Sep 2001
    Location
    Orinda, California
    Posts
    2,311
    Here is the completed look. Note the new hatch cover. It was shown earlier on the varnishing rack . . . Frank says to note the storage below . . .
    Attached Images  

  8. #38
    Join Date
    May 2004
    Location
    Pembroke Ontario Canada
    Posts
    592

    thief

    Bill .. I stole the anchor locker idea from the triton site. Frank #50

  9. #39
    Join Date
    Apr 2004
    Location
    Pensacola, FL
    Posts
    725

    Thumbs up Cool !

    That is a cool mod Frank.

    How much chain do you plan to carry? how much higher would you estimate that shelf would make the chain?

    I like the mod, and would think it would be a good way to 'segregate' the chain locker. I plan to carry more chain then I really want to use on a regular basis. Maybe the regular rode (mine is 150') with 30' or so could ride on the shelf while the remainder is laying at the ready below, with the spare anchor and other stuff that could get stand to get wet every once and a while.

  10. #40
    Join Date
    May 2004
    Location
    Pembroke Ontario Canada
    Posts
    592

    Wink Anchor locker

    I carry 50ft chain and 150 rode there. I have a further 100ft chain in a bucket in the bilge (ballest) if needed. The lower erea should not get wet. The 'shelf' drains forward and overboard and is 'glassed' in . I'll let you know if it works out in practice like in theory.

  11. #41
    Join Date
    Sep 2001
    Location
    Orinda, California
    Posts
    2,311

    Ice Box Conversion

    Frank has plans for the ice box area. "Can't belive how easy these came out . . . NOT!"
    Attached Images  

  12. #42
    Join Date
    Sep 2001
    Location
    Orinda, California
    Posts
    2,311

    Conversion In Progress

    Frank installed a 5-Day cooler, plus 1" foil covered foam on three sides, plus two cans of spray foam. Should be a very efficient cooler.
    Attached Images  

  13. #43
    Join Date
    Sep 2001
    Location
    Orinda, California
    Posts
    2,311

    Completed

    Jobe completed. Note the 1x3x12 inch board next to companionway. This will swing out with a CP150 chart plotter attached for viewing from the cockpit. Frank thanks Siraccco for the idea.
    Attached Images  

  14. #44
    Join Date
    May 2004
    Location
    Pembroke Ontario Canada
    Posts
    592

    Talking I hate computers

    I'd like to thank Bill for taking the time to post these for me.As you can see ..even putting the correct date on my camera eludes me. Would also like to thank sirrocco's posting pic's for many insperations...you'll see more stolen ideas later.PS..the cooler has a hose hooked up that will gravity drain the water.

  15. #45
    Join Date
    Sep 2001
    Location
    Orinda, California
    Posts
    2,311

    Double Bunks!

    Frank has figured out how to have TWO double bunks on his Ariel. Here is the base for one in the cockpit. He claims it's the best bed on nice nights.
    Attached Images  

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts