+ Reply to Thread
Results 1 to 15 of 47

Thread: Large Portlights

Hybrid View

  1. #1
    Join Date
    Nov 2005
    Location
    Narragansett Bay, R.I.
    Posts
    597
    The seller's note on the ebay page shows they are aluminum
    Last edited by bill@ariel231; 06-25-2007 at 11:04 AM.

  2. #2
    Join Date
    Jan 2004
    Location
    Scarborough, Maine
    Posts
    1,439
    Thank god!
    Mike
    Totoro (Sea Sprite 23 #626)

  3. #3
    Join Date
    Sep 2001
    Location
    San Rafael, CA
    Posts
    3,621
    Those frames have a golden tint to them. Too bad, huh?

    "No corrosion" would be something to consider as a replacement. Especially if they go cheap. Also the ALL the screws still work. That's something!

    Just measured 338's aluminum ones using an american tape. 23 3/4" long and 10 7/8" width. That's larger than what the seller states.

    Even a 1/4" difference in either dimension could make it impossible to refit a slight smaller frame onto an Ariel - if that is what the 37 has.
    Assuming that all Ariel's had the exact same size frames over the years.

  4. #4
    Join Date
    Nov 2005
    Location
    Narragansett Bay, R.I.
    Posts
    597
    a little fiberglass work can make anythig fit...

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts