+ Reply to Thread
Page 4 of 24 FirstFirst 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 LastLast
Results 46 to 60 of 348

Thread: Ariel #414

  1. #46
    Join Date
    Jan 2004
    Location
    Scarborough, Maine
    Posts
    1,439
    Thanks Tony! They are some nice little boats.

    The Yahoo Triton list. He emailed me some offline - beautiful! I can send 'em along off-line if you like...
    Last edited by mbd; 09-19-2005 at 11:38 AM.
    Mike
    Totoro (Sea Sprite 23 #626)

  2. #47
    Join Date
    Jan 2004
    Location
    Scarborough, Maine
    Posts
    1,439

    Unhappy

    Winter is here.
    Attached Images  
    Mike
    Totoro (Sea Sprite 23 #626)

  3. #48
    Join Date
    Jul 2004
    Location
    Winyah Bay, SC
    Posts
    605
    "Oh the weather outside is frightful,
    but those lines... are so delightful..."

    Kurt - Ariel #422 Katie Marie
    --------------------------------------------------
    sailFar.net
    Small boats, long distances...

  4. #49
    Join Date
    Jan 2004
    Location
    Scarborough, Maine
    Posts
    1,439
    "E" -- they're much more delightful in the water!

    Here's a shamelss plug for the association paraphernalia... Start 'em young and they'll learn to like varnish, sanding and bottom paint.

    We'll see if it works...
    Attached Images  
    Mike
    Totoro (Sea Sprite 23 #626)

  5. #50
    Join Date
    Jul 2004
    Location
    Winyah Bay, SC
    Posts
    605
    "'Brainwashing children'? Well, no, we prefer to think of it as "pre-adult nautical career guidance"..."
    Kurt - Ariel #422 Katie Marie
    --------------------------------------------------
    sailFar.net
    Small boats, long distances...

  6. #51
    Join Date
    Jan 2004
    Location
    Scarborough, Maine
    Posts
    1,439

    Thumbs up

    Heeeey, I like the sound of that!
    Mike
    Totoro (Sea Sprite 23 #626)

  7. #52
    Join Date
    Jan 2004
    Location
    Scarborough, Maine
    Posts
    1,439

    Angry Recore progress

    Well, we got off easy this Winter and the Spring started off promising. But Mother Nature has a way of evening things out. As a result of the recent monsoons, progress on the recore has been frustratingly slow.

    I've been looking at this view of the boat in the side yard waaaaay too much this last month!
    Attached Images  
    Mike
    Totoro (Sea Sprite 23 #626)

  8. #53
    Join Date
    Jan 2004
    Location
    Scarborough, Maine
    Posts
    1,439
    The deck hardware is off with just a handful of siezed/broken screws/bolts. I still need to remove the coamings and chain plates - the windows are staying for another project down the road.
    Attached Images  
    Last edited by mbd; 02-06-2007 at 05:50 AM.
    Mike
    Totoro (Sea Sprite 23 #626)

  9. #54
    Join Date
    Jan 2004
    Location
    Scarborough, Maine
    Posts
    1,439
    I'm still debating on removing the companionway hatch and trim. It'll make painting a lot easier if I do.

    The supplies are bought and I'm watching far too many other boats going into the water to wait much longer. In the next couple of weeks, I'm going to take some time off work and go at it with a vengence during the days - the season is just too short.
    Attached Images  
    Mike
    Totoro (Sea Sprite 23 #626)

  10. #55
    Join Date
    Mar 2006
    Location
    Havre de Grace, MD
    Posts
    207
    I'm just a little ahead of you, I have pictures just haven't posted yet (keep forgeting to bring the camera home) I decided to postpone the recore till winter, and just rebed all the deck hardware in the meantime (bedding - drilling a 5/8 hole in the top skin digging out as far back as i can and filling with thickened epoxy, after that I had planned for "Lifecaulk" for a sealant . . . but the river ate 7/8 of my tube.
    #97 "Absum!"

  11. #56
    Join Date
    Jan 2004
    Location
    Scarborough, Maine
    Posts
    1,439

    Progress

    I was actually able to leave the boat uncovered over night. I must say, the coamings add a LOT to these boats.
    Attached Images  
    Last edited by mbd; 06-11-2006 at 07:54 PM.
    Mike
    Totoro (Sea Sprite 23 #626)

  12. #57
    Join Date
    Jan 2004
    Location
    Scarborough, Maine
    Posts
    1,439
    I split one of the *&$@# coamings because I pulled at it before I had really broken the butyl's hold. A PO used lots of butyl when reattaching the combings.

    Now I need to build shelves in the garage so I can use the workbench...
    Attached Images  
    Last edited by mbd; 06-11-2006 at 07:54 PM.
    Mike
    Totoro (Sea Sprite 23 #626)

  13. #58
    Join Date
    Jan 2004
    Location
    Scarborough, Maine
    Posts
    1,439
    A less than pristine cockpit and the tools used for removing the coamings...

    I'm thinking I'll save the companionway hatch and windows for another season and just paint around the edges the best I can.
    Attached Images  
    Last edited by mbd; 02-10-2007 at 08:19 PM.
    Mike
    Totoro (Sea Sprite 23 #626)

  14. #59
    Join Date
    Jan 2004
    Location
    Scarborough, Maine
    Posts
    1,439

    Decore begins...

    I opted to go for a "small" area and just tackle on side deck. Using a circular saw I cut a line up the starboad side deck along the toe rail, then back down along the cabin. Then I divided it into 4 good sized sections by cutting across the other way. I finished the cuts off with a dremel with a metal cutting bit which worked very nicely.

    I went after the section I thought had the most problems. Not much delamination here, and it was a real pain to peel off and clean out. I spent the better part of the afternoon chiseling and hacking the not-so-bad core out of the area...
    Attached Images  
    Last edited by mbd; 07-01-2006 at 05:33 PM.
    Mike
    Totoro (Sea Sprite 23 #626)

  15. #60
    Join Date
    Jan 2004
    Location
    Scarborough, Maine
    Posts
    1,439

    Plan 'B'

    After clearing everything off the decks because of an afternoon thunderstorm, I thought perhaps I should try and hone in on the known bad spots. So, just forward of the section I just did, I made another cut lengthwise to try and just get the area around the chainplates.

    Bingo. It was nice to see some bad core. (Did I just say that?) In any event, it was way easier to remove the material for these "sub" sections.

    I'm already planning on replacing my chain plates, and looking at these soggy gaping holes in the side deck has me thinking about external chain plates again. Besides three less holes in each side deck, I think they look pretty shippy too. I'll have to hit the "search" button.
    Attached Images  
    Mike
    Totoro (Sea Sprite 23 #626)

+ Reply to Thread

Similar Threads

  1. Ariel #258 on E-bay "Rum Runner"
    By tha3rdman in forum General/Off-Topic
    Replies: 2
    Last Post: 08-10-2006, 06:03 PM
  2. Ariel 18 (another RI ariel in long term storage)
    By bill@ariel231 in forum General/Off-Topic
    Replies: 4
    Last Post: 07-18-2006, 10:25 AM
  3. Ariel #382
    By Tim61N in forum Gallery
    Replies: 11
    Last Post: 10-30-2005, 07:07 AM
  4. Ariel (483?) for sale on E-bay
    By c_amos in forum General/Off-Topic
    Replies: 9
    Last Post: 12-06-2004, 08:12 AM
  5. What would you do?
    By Kiwi in forum Sailing and Events
    Replies: 3
    Last Post: 11-27-2004, 08:00 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts