+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 15 of 80

Thread: Ariel #1

Hybrid View

  1. #1
    Join Date
    Dec 2002
    Location
    Conshohocken, PA
    Posts
    109

    Ariel #1

    John Griffiths, a retired marine surveyor, is restoring hull #1 in MD. Hull #1 was sunk on land. Abandoned. John bought her and took her to his farm in Earleville.

    The engine is a 12 hp yanmar that John restored also.
    Attached Images          

  2. #2
    Join Date
    Dec 2002
    Location
    Conshohocken, PA
    Posts
    109

    Ariel #1

    John Griffiths, a retired marine surveyor, is restoring hull #1 in MD. Hull #1 was sunk on land. Abandoned. John bought her and took her to his farm in Earleville.

    The engine is a 12 hp yanmar that John restored also.
    Attached Images    

  3. #3
    Join Date
    May 2005
    Posts
    36
    Wow! What did he use for that gorgeous new strongback?

  4. #4
    Join Date
    Dec 2002
    Location
    Conshohocken, PA
    Posts
    109

    Ariel #1

    Two more shots.
    Attached Images    

  5. #5
    Join Date
    Sep 2001
    Location
    Hampton Roads Va.
    Posts
    821

    Question Restoring?

    So he is going to take all those cabin modifications out and put ugly 60's plastic laminate back in ?

  6. #6
    Join Date
    May 2004
    Location
    Pembroke Ontario Canada
    Posts
    591

    Thumbs up hull # 1

    Great to see #1...even better to see her in capable hands..looks SUPER !!!!! Keep the pics coming as the project progress's

  7. #7
    Join Date
    Dec 2002
    Location
    Conshohocken, PA
    Posts
    109

    More pictures of Kestrel

    When I asked John "Where do you start?" when you have a derilict boat like Kestrel was when he found her in an Oxford boatyard, he responded:
    "Start with the nastiest job. Do it when you're still in love. Don't begin by refinishing the brightwork."

    Kestrel had a long list of really nasty jobs vying for the honor of being the nastiest. A lot of 'glass work on the decks and coachroof'; the keel had vater in the voids. He drained and reglassed that. He removed the old engine and replaced it with a Yanmar 2GM diesel. New driveshaft and rudderpost and the tube that holds the post had to be reglassed. New fuel tank and water lift muffler. The pictures will some of the story better than I can.

    These have been taken over a period of two years. l hope to take some new ones this weekend.
    Last edited by Bill; 06-08-2005 at 01:26 PM.

  8. #8
    Join Date
    Dec 2002
    Location
    Conshohocken, PA
    Posts
    109

    Exclamation More pictures

    I suppose one could argue semantics regarding restoration vs. repair. As far as being stripped of her histoical value is concerned what are any of us doing when repairing these boats? What did Geoff do when he added a hard dodger? This boat was derelict. It's historical value had been stripped long ago and her next voyage was to the dump.

    Call Kestrel a re-built boat ... but she's been restored to life.
    Attached Images          

  9. #9
    Join Date
    Dec 2002
    Location
    Conshohocken, PA
    Posts
    109
    Some more pictures
    Attached Images      

  10. #10
    Join Date
    Sep 2001
    Location
    San Rafael, CA
    Posts
    3,621

    Restore/rebuild?

    There's the 'letter of the law.' Mike is correct about the word 'restore.' It has come to mean 'bring back to its original condition.' And equipment. A museum quality Ariel would have to have every piece authentic original including, we presume, the oil filter on the Atomic 4. A museum quality Ariel would have to been stored unused and covered in a barn since 1962.

    It does look like #1 has had some enhancements that are not true to her type. What's in a number? In some ways it is a disappointment, but it IS more important that the boat will go on sailing into the future. Even if 'restoration' is not wholly correct. 'Refit' is a nice neutral word for the effort Capt John is making.

    Went thru some heavy mental games myself when I began working on 338. Choose to make my peace with Alberg - not Pearson. To restore an Ariel to what Pearson put in the marketplace would be ludicrous. There is no way to do anything to the inside of the vessel that you couldn't do better. The furniture in an Ariel is some of the ugliest carpentry ever conceived. The bulkheading not far behind. Restoring that would be rather sick and impossible.

    Looking at it from both sides now, tough love sez you can't restore any Ariel. Made me feel a little better when I too decided to appeal to Alberg rather than Pearson for the violations I have did to 338. It's my personal opinion that Carl never climbed down the ladder into any of his boats under 35', anyway!

    In pure terms of a Great Project Boat an Ariel is MADE for that function. Improvements, modifications, rebuilding, customizing, alterations, reworking, remodeling, modernizing - not a problem. When you get it done, you'll still have an exceptional boat that will get you there
    and back again.
    Last edited by ebb; 06-09-2005 at 07:21 AM.

  11. #11
    Join Date
    May 2004
    Location
    Pembroke Ontario Canada
    Posts
    591

    Wink restore..renovate..refit..customize..rejuvenate..

    modify..rebuild..improve..bla bla bla bla bla.Details details details.Can't sail a boat in a museum.Save it from the bone yard..make her how ya like it..sail it !!! The beauty of these boats will be appreciated for MANY more years because of all our efforts...what ever ya want to call them. That they are still out there sailing and will be for a long time yet is what really matters.
    Last edited by frank durant; 06-09-2005 at 08:03 AM.

  12. #12
    Join Date
    Sep 2001
    Location
    Asst. Vice Commodore, NorthEast Fleet, Commander Division (Ret.) Brightwaters, N.Y.
    Posts
    1,823
    Congrats to John on the good work.

    The mold inside my boat will now be called "historic patina"

  13. #13
    Join Date
    Dec 2002
    Location
    Conshohocken, PA
    Posts
    109

    Hull #1 Update

    An old campaigner is about to make a come-back. Kestrel, Ariel #1, is just about ready to go. After a nearly 5-year long re-build, her owner plans to launch her in early September. Plans are to take her down the Inland Waterway to Florida and to the West Indies this winter.

    Pictures and a story to follow.

  14. #14
    Join Date
    Jan 2004
    Location
    Scarborough, Maine
    Posts
    1,439
    Fantastic! Lots of pictures please!
    Mike
    Totoro (Sea Sprite 23 #626)

  15. #15
    Join Date
    Jul 2004
    Location
    Winyah Bay, SC
    Posts
    605
    Seconded!
    Kurt - Ariel #422 Katie Marie
    --------------------------------------------------
    sailFar.net
    Small boats, long distances...

+ Reply to Thread

Similar Threads

  1. Ariel #258 on E-bay "Rum Runner"
    By tha3rdman in forum General/Off-Topic
    Replies: 2
    Last Post: 08-10-2006, 06:03 PM
  2. Ariel 18 (another RI ariel in long term storage)
    By bill@ariel231 in forum General/Off-Topic
    Replies: 4
    Last Post: 07-18-2006, 10:25 AM
  3. Ariel #382
    By Tim61N in forum Gallery
    Replies: 11
    Last Post: 10-30-2005, 07:07 AM
  4. Ariel (483?) for sale on E-bay
    By c_amos in forum General/Off-Topic
    Replies: 9
    Last Post: 12-06-2004, 08:12 AM
  5. What would you do?
    By Kiwi in forum Sailing and Events
    Replies: 3
    Last Post: 11-27-2004, 08:00 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts