Printable View
Craig's list add; http://grandrapids.craigslist.org/boa/787583875.html
Pearson Ariel Sailboat - $2900 (Byron Center)
Reply to: sale-787583875@craigslist.org
Date: 2008-08-07, 8:26PM EDT
Pearson Ariel Hull # 198
- Interior redone
- All below water hoses and lines new
- Top repainted
- On car hauler for trailer (included with boat)
- Only needs bottom paint to sail
Want sold, please make offer!
Sorry, that one's no longer for sale. Picked it up last monday, Didn't pay nearly that much for her either. Got tired of her sitting there in the feild.
Trailer is a nice low-riding flatbed with a pair of 5000lb axles, cradle is wood
Was looking at a bristol 24 in New York at $1000, but figured the Ariel was a lot closer and after looking it over, and determing what it would take to get the bristol home offered him $2000 if he delivered it to my house.
Not bad shape, very good sails, but previous owner was not that good at bedding the hardware, used silicone, and mixed screws (phillips/flathead, and sanded the coamings while they were installed and sanded the chrome off the screw heads!!! ^%&**$# )
Two small soft spots on the deck near the windows,(less than a foot around) sat there for 6 years and the bilge is bone dry, and full of cobwebs. Ther are a few small 'drip' marks inside, but nothing to be concerned with, largest is maybe 4" around, and I can't realy tell if it's from leaks or condensation.
Ad was truthfull in that bottom paint is all that's really needed to splash her, but there's a LOT of cosmetic work needed, and I realy want to address the soft spots.
(Can anyone tell me how thick the balsa is on deck under the windows?, Havent been able to find info and don't want to start cutting/drilling untill I have the materials to fix it)
Very nice boat with a lot of potential, and no regrets so far, other than the infestation of wasps and tree frogs.
Ken.
Congrats Ken!
Hope they did not get too carried away on the silicone... :rolleyes:
The work will be worth the effort, glad she went to a good home. :D
Took a few pics this evening, pretty much just because I had the camera. (use it to check hard to see areas) Two serious issues, one trouble spot, the two soft spots, and four 'what the heck are they for' plates pretty much make up the repairs she needs:
http://picasaweb.google.com/merc2dogs/Ariel#
No exterior shots, too dark when I decided to snap the pics.
Ken.
Keep the photos coming, Kendall!
Glad you listened to the Ariel when she was talking to you.
Maybe Bill's resource here will help with the anomalies you find.
I just looked up the Bristol 24 you passed up. And I have a picture in the archives, Wind Song(?), with a square hole in her transom for tilting up the OB in the well, I thought. There isn't much info out there on what looks like another nice pocket cruiser similar to the Ariel.. Said to be originally made by Sailrite when Clint Pearson bought the business he renamed Bristol.
Interesting, I can't find a designer's name associated with the boat, and there certainly is no site like what we have here in the Ariel Association connected with the 24. (Halsey Herreschoff would put a hole in a transom but I don't think Alberg would.) They were built into the 80's I think, much longer than the A/Cs. One signature feature is the large lid over the OB well like the Ariel's - but the two interior layouts are different from Alberg's usual.
Have lots of fun.:cool:
Hey Kendall,
Congratulations! Welcome to the family! Where are you going to sail her? Lucky Dawg needs company at Torresen's in Muskegon next spring. Cheap and less than a mile from Lake Michigan. I love the versatility of Muskegon Lake when the waves are too big on the Big Lake.
Sounds like you know what you're doing. Will look forward to the play-by-play.
Thanks for the welcome!
That's exactly where I plan to keep her. Not too far from home and like you say, muskegon lake is good to sail on when the big lake doesn't want to play nice. Debating on a mooring or slip though.
Are you still in the water? Plan on bringing the main in to bluffton bay this week for inspection, and see if they can put a couple reefs in, feels good and looks plenty good, but ya never know. Would like to swing by and take a peak at Lucky Dawg.
went out and poked at the one through hull patch, and punched a screwdriver right through it with very little effort, (one good open handed smack on the handle) 100% bondo, once you get past the outside layer it's pink. Scares me that someone sold her as 'ready to sail' with nothing but bondo filling those holes. Don't get me wrong, I'm very willing to take chances for -ME- but I wouldn't think of putting someone else at risk.
Ken.
I'm in a slip. Both for easy family boarding and for electrical hook-up. Jim / Bluffton did my main's repair and made the suggestion to make it loose footed (below). We're still in. Held out till the first week of November last year. Peek away. (Enter Torresen, head down the right side of the main slip-bay and we're halfway down. Look for the A/C and UGA burgees flappin!) Better yet, Sadie (my daughter) and I sail most good-sailing-weather Monday's and you are most welcome to join us.
Good fate for #198! - passed on to an owner who'd never bondo her.
Haven't had a chance to make it out that way yet!
Got wrapped up doing things around the house and haven't even had a chance to do much more than clean the boat up.
Did get around to making new end blocks for the coamings, turned out pretty well I'd say. Since I didn't have any materal large enough I had to glue them up, every place that had material large enough wanted to sell 5ft lengths or longer.
Put some pics up here:
http://picasaweb.google.com/merc2dog...CoamingBlocks#
Thought of just making a 'flat' return to the cabin sides, but never realy cared for the looks of that.
Figured out how to make the curved front very easily, and they're almost an exact duplicate of the originals.
May not be in the water, and still needs paint, but the brightwork is nearly done!
Ken.
Hey that's some nice work!
I haven't had time to work on 198 for a while because of marital strife and several move out/back in episodes that I'm getting kind of tired of. Putting it here in hopes someone is interested.
Clean title and registered till 2014. She does need work, I removed the icebox and counter so interior is pretty bare, just benches and temporary counter installed and has several soft spots on deck.
Good sails and rig.
The trailer she sits on is a 20ft flatbed with two 3500lb axles, electric brakes on front axle. Tires hold air but are old. It takes regular 6 bolt wheels (6 bolt chevy pattern I believe) $1200 gets trailer too.
If you're local and don't want the trailer, we can discuss a price without it, simply pay the $1200, bring the trailer back within a week, and I'll give you back the difference.
She has been up for sale several times for $1200 complete with the trailer she sits on. I've had a few people call and ask but the only serious offer I had was $600 if I keep trailer and rig, and allow them to cut her up on site, I prefer not to go with that one.
Edited to hopefully correct the format, spelling errors and trailer length.
Hi Kendall, do you have a truck that can move the boat? If so, contact me off list: averyboyer168 AT gmail dot com.
Hope you told the would-be scrapper exactly what you thought of that idea!!!
Sorry, but the only vehicle I have is an old explorer sport that hasn't been driven in about a year. Don't think it would tow the Ariel any distance
Kendal, Hi, Could you send me some recent pictures of the boat and trailer. When you say 26 ft trailer is that the bed or the entire length? I'm seriously interested. Thanks Carl
At present I can't seem to locate my camera, but will try to borrow one and get more recent pics. basically, haven't done much since the first pics were posted other than remove the counter and icebox, and correctly fill the original through hulls for the head.
I messed up on the trailer length somehow, it's 20 foot overall, not 26, no idea where the 26 came in. (edited that post) The hitch is just ahead of the bow, and the trailer extends to just aft of the rudder with the stern extending roughly 4 feet beyond.
The deck boards on the trailer are old and could use replacement, but the cradle is wide enough that if the boards weren't there it would sit on the frame rails.
My plan was to weld jack stands to the trailer corners, remove the old cradle and trailer deck, then weld two more stands in the center for use as a dedicated boat trailer.
Edited because I had noscript running, and it always puts all the text into one big hard to read lump.
Kendall, Have you located a camera yet??
Hi Kendall, sorry I never replied. It sounds like the trailer wouldn't really be up for any kind of extensive journey, anyway. Good luck, hope you find her a loving home.
Sorry for delay in posting, been very busy and dealing with death in family, and a close relative with serious illness.
As far as 198, I have a solid offer from a scrapper of $1200 in two weeks for the hull and trailer, so unless something else happens, I'll be posting sails and rigging and other equipment at a later date.
Odd thing about this is that while I had brand new never unwrapped sails up for sale, I have never heard a word. I do have nice new shade awnings now.
Would you be willing to pull all of the deck hardware and the ice box hinges, and latch? I am restoring Hull #107 and she needs a LOT of these items! Also, interested in anything you have including the sails.
Still have the old sails, and a few other things, opening ports, the old winches and some of the deck hardware. Most is in a shed out back, supposed to hit 45 today, I'll see if I can inventory what I have.
Kendall, might get more results with a FS thread in the Off Topic forum.
Excellent, Kendall. Much appreciated! I am looking forward to seeing what you have. Photos would be very helpful, if possible.
Thanks!
Matt
If you like, you can PM me. I need a lot of components to get A107 back up to snuff.
Matt
Any updates on the items that you might have available?
I haven't had a chance to get to them yet, got hit with a bunch of frozen water lines in the house, and my wife broke the truck, so been busy :)
No worries. Thank you!!!