I would like to add a roller furling assembly on my commander. I am not familiar with the installation process. Also does the jib need to be modified? any advice would be appreciated. Jeff Z. Wobbly
Printable View
I would like to add a roller furling assembly on my commander. I am not familiar with the installation process. Also does the jib need to be modified? any advice would be appreciated. Jeff Z. Wobbly
Please search on roller furling to find background information. Use the Google search method described in the "Off Topic" forum in the "Posting Guide" thread.
I just returned from checking on my commander and noticed that the mast base seems to be cantilevered backwards- the compression post seems fine and there is no sign of any damage down below. I checked the mast with a level and it is perfectly plumb. Is this how the step is supposed to look? Any comments will be appreciated. I have photos on my I-pad- just have to figure how to upload them to this site.
Jeff Z. Commander 261.
After a few hectic weekends of painting and varnishing, Wobbly is finally in the water!
Comm.227, that front pump should be for the freshwater cooling system. I think the pulleys are a little on the large size, but it should cool nicely.
Your Commander since nicely on her lines for an inboard model...... very nice indeed!!!
Ahoy Captain Jeff ! Nice job on your interior work and if you get a minute and don't mind too much , would you be willing to send me your interior cushion measurements? That is something I didn't get with the boat and still need to do. It would be greatly appreciated as the drawings in the owners manual are not to scale. Thanks , Paul.
Wobbly will be residing in Sarasota on the Manatee river next week as my wife and I fled the harshness of Buffalo N.Y. Having an atomic 4 inboard with a heat exchanger instead of being raw water cooled, are there any concerns that I should be aware of regarding saltwater use?
Also, while the mast is unstepped I would like to replace the main and jib halyards. any recommendations on the diameter of line that I should use? I have the original halyards with the wire terminal ends. Any input on this would be greatly appreciated.
Jeff Zimmerman