-
2 Attachment(s)
hello, here is some picture of the restoration of Grindel
Attachment 10347
hull whitout all old antifouling and treatment of the dozen osmosis blisters
Attachment 10348
underwater hull with 4 layer epoxy primer, 1
hanging layer and antifouling and rudder
epoxy laminate and rudder shoe
-
5 Attachment(s)
Attachment 10350
Attachment 10349
Attachment 10353
cockpit reinforcement. on the hull 3 cm airex with rowing and polyester resin. and vertically 2.5x3 cm marine plywood with rowing and epoxy resin. horizontally 2x8 cm plywood
with fiberglass fabric that goes up along the cocpit
-
2 Attachment(s)
strengthening the chain-plate
and new support for chandelier, 5x8x8 marine plywood bonded to epiglue and fiberglass and carbon and epoxy resin
Attachment 10354
reinforcement of the bridge under the winch and remove hood under the genoa sheet rail
Attachment 10355
-
Attachment 10354
reinforcement of the bridge under the winch and remove hood under the genoa sheet rail
Attachment 10355
strengthening the chain-plate
and new support for chandelier, 5x8x8 marine plywood bonded to epiglue and fiberglass and carbon and epoxy resin
-
1 Attachment(s)
Attachment 10356
grindel at home